Maytag Dryer Start Button Not Working: Troubleshooting Guide

The Maytag dryer start button may not be working due to insufficient pressure or a defective button. It could also be caused by a malfunctioning control panel.

Understanding The Issue

If your Maytag dryer start button is not working, it could be due to a faulty start switch or control issues. Check if the button is pressed down firmly or if the control panel is malfunctioning. For troubleshooting, you can refer to helpful videos and guides online.

Troubleshooting Steps

When your Maytag dryer start button is not working, it can be frustrating and inconvenient. However, before calling a technician, there are a few troubleshooting steps you can take to potentially resolve the issue and get your dryer up and running again. Follow these steps to check for common problems:

Step 1: Checking The Door Switch

The door switch is a safety feature that prevents the dryer from starting if the door is not securely closed. Start by ensuring that the door is fully closed and latched. If the door switch is not making proper contact, it may need to be replaced. Here’s how you can check the door switch:

1. Unplug the dryer from the power source.
2. Locate the door switch, which is usually situated near the top of the door opening.
3. Using a multimeter, test the continuity of the door switch by connecting the probes to the switch terminals.
4. If the multimeter does not show continuity when the switch is pressed, then the door switch is likely faulty and needs to be replaced.
5. Consult your dryer’s manual or contact a professional for guidance on replacing the door switch.

Step 2: Testing The Start Switch

The start switch is responsible for sending a signal to the dryer motor and heating elements, initiating the drying cycle. If the start switch is faulty, the dryer won’t start. Here’s how you can test the start switch:

1. Unplug the dryer from the power source.
2. Locate the start switch, which is typically located on the control panel.
3. Remove the wires connected to the start switch.
4. Using a multimeter, test the continuity of the start switch by connecting the probes to the switch terminals.
5. If the multimeter does not show continuity when the switch is pressed, then the start switch is likely faulty and needs to be replaced.
6. Refer to your dryer’s manual or contact a professional for assistance with replacing the start switch.

Step 3: Inspecting The Dryer Timer

The dryer timer controls the duration of each drying cycle. A malfunctioning timer can prevent the start button from working. Follow these steps to inspect the dryer timer:

1. Unplug the dryer from the power source.
2. Remove the control knob from the timer shaft.
3. Inspect the timer for any signs of damage or wear.
4. If the timer appears damaged or worn out, it may need to be replaced.
5. Consult your dryer’s manual or seek professional assistance for replacing the timer.

Step 4: Detecting Control Board Problems

The control board, also known as the electronic control board, is responsible for sending signals to the various components of the dryer. If the control board is malfunctioning, it can cause the start button to stop working. Follow these steps to detect control board problems:

1. Unplug the dryer from the power source.
2. Remove the control panel and inspect the control board for any visible signs of damage, such as burnt components or loose connections.
3. If you suspect the control board is faulty, you may need to replace it.
4. Consult your dryer’s manual or seek professional assistance for replacing the control board.

By following these troubleshooting steps, you may be able to identify and resolve the issue with your Maytag dryer start button. If these steps do not fix the problem, it is recommended to contact a professional repair service for further assistance.

Repair And Replacement Solutions

Having trouble with your Maytag dryer start button not working? Learn how to troubleshoot and replace the push-to-start switch with helpful videos and guides. Fix the issue and get your dryer up and running again in no time.

Replacing The Push-to-start Switch

If your Maytag dryer fails to start when you press the start button, one possible culprit could be a faulty push-to-start switch. To replace the push-to-start switch, follow these steps:

1. First, make sure to shut off the power supply to the dryer to avoid any electrical accidents.
2. Next, remove the back panel of the dryer to access the switch.
3. Unscrew the old push-to-start switch and disconnect any wires attached to it.
4. Install the new push-to-start switch in its place, ensuring all wires are properly connected.
5. Reattach the back panel and restore power to the dryer.
6. Finally, check if the new push-to-start switch resolves the issue with the start button.

Repairing Or Replacing The Door Switch

A malfunctioning door switch can also prevent the Maytag dryer from starting. To repair or replace the door switch, follow these steps:

1. Similar to before, make sure to turn off the power supply to the dryer.
2. Locate the door switch, usually found near the door latch or strike.
3. Inspect the door switch for any visible damage or loose connections.
4. If the switch is damaged or not working properly, replace it with a new one.
5. Ensure all wires are securely connected to the new door switch.
6. Restore power to the dryer and test if the start button now functions correctly.

Fixing Or Replacing The Dryer Timer

A broken dryer timer is yet another potential cause for a non-working start button on your Maytag dryer. To fix or replace the dryer timer, follow these steps:

1. As always, start by switching off the power supply to the dryer to prevent any accidents.
2. Locate the dryer timer, which is typically found on the control console of the appliance.
3. Check the timer for any visible damage or signs of wear and tear.
4. If necessary, replace the faulty dryer timer with a new one.
5. Ensure all connections and wiring are properly reattached to the new timer.
6. Restore power to the dryer and check if the start button is now working as expected.

Repairing Or Replacing The Control Board

In some cases, the control board of your Maytag dryer may be the root cause of the start button not functioning. To repair or replace the control board, follow these steps:

1. Once again, turn off the power supply to the dryer.
2. Locate the control board, which is typically found on the control panel or inside the dryer.
3. Inspect the control board for any visible damage or signs of malfunction.
4. If needed, replace the faulty control board with a new one.
5. Ensure all connections and wiring are securely reconnected to the new control board.
6. Finally, restore power to the dryer and test if the start button is now operational.

Tips For Preventing Future Issues

Experiencing a Maytag dryer start button not working can be frustrating, especially when you have a pile of laundry that needs to be dried. However, there are a few preventive measures you can take to avoid such issues in the future. By following these simple tips, you can ensure smooth operation of your Maytag dryer and avoid any unnecessary disruptions.

Regular Maintenance And Cleaning

Regular maintenance and cleaning of your Maytag dryer are crucial for its optimal performance. Over time, lint and debris can accumulate in the dryer vent, causing it to clog. This not only affects the drying efficiency but can also put unnecessary strain on the start button. To prevent this, make sure to clean the lint screen after every use and inspect the vent for any blockages regularly.

Avoiding Overload And Proper Use Of The Dryer

One common cause of a non-functioning start button is an overloaded dryer. Putting too much laundry in the dryer can cause the motor to overheat, leading to start button issues. To prevent this, avoid overloading your dryer and distribute the load evenly. This ensures proper airflow and prevents excessive strain on the start button.

In addition, it’s important to use the dryer correctly. Avoid drying items that are not suitable for the dryer, such as rubber-backed rugs or shoes. These items can damage the dryer and affect the start button’s functionality. Always refer to the manufacturer’s instructions for proper usage guidelines.

Using Recommended Dryer Settings

Using the recommended dryer settings is essential for the longevity of your Maytag dryer’s start button. High heat settings can cause excessive wear and tear on the button, leading to malfunctions. Opt for lower heat settings whenever possible, especially when drying delicate items. Additionally, avoid using the “Quick Dry” setting for heavy loads as it can overwork the start button. Use the appropriate settings for each load to prevent any future issues.

By following these preventive measures, you can minimize the risk of experiencing a Maytag dryer start button not working. Regular maintenance, proper use, and adhering to recommended dryer settings are key to ensuring your dryer operates smoothly for years to come.

Credit: www.maytag.com

Frequently Asked Questions Of Maytag Dryer Start Button Not Working

How Do I Fix The Push Start Button On My Maytag Dryer?

To fix the push start button on your Maytag dryer, first, make sure it is pressed down firmly. If it still doesn’t work, it may be defective or there could be a problem with the control panel. You can test the start button by following a YouTube tutorial or consult a professional for assistance.

When I Press The Start Button On My Dryer Nothing Happens?

If the start button on your dryer does not work, there can be several reasons. It could be a faulty door switch, start switch, or control problems like a broken timer or electronic control board. Check if the control lock function is enabled, as it can prevent the dryer from starting.

Ensure that the start button is pressed down firmly. If the issue persists, there may be a malfunction in the control panel.

Why Is My Maytag Dryer Not Starting But Has Power?

The Maytag dryer may not start even with power due to various reasons such as a faulty door switch, start switch, or control problems like a broken timer or electronic control board. Ensure the Control Lock function is not enabled by checking if the button is illuminated.

How Do I Test My Maytag Dryer Start Button?

To test your Maytag dryer start button, follow these steps: 1. Ensure the power is turned off. 2. Remove the back panel. 3. Install a new push-to-start switch. 4. Reattach the back panel. 5. Restore power to the dryer. If your dryer still won’t start, other potential issues could include a faulty door switch, broken timer, or a faulty electronic control board.

If you’re unsure or need further assistance, consult a professional.

Conclusion

If your Maytag dryer start button is not working, there could be a few potential issues at play. It’s important to make sure the button is pressed down firmly, as a loose connection may be preventing it from working properly.

Additionally, the control panel could be malfunctioning and in need of repair or replacement. By addressing these potential issues, you can get your Maytag dryer back up and running efficiently. Remember to always consult a professional if you’re unsure or uncomfortable with DIY repairs.