Kenmore Refrigerator Model 795 Troubleshooting

Kenmore Refrigerator Model 795 troubleshooting involves checking the power supply and temperature controls for malfunctions.

Kenmore Refrigerator Model 795 Troubleshooting

Credit: m.youtube.com

Common Issues With Kenmore Refrigerator Model 795

Kenmore Refrigerator Model 795 is a popular choice among homeowners for its reliability and performance. However, like any appliance, it can experience certain issues that may disrupt its normal functioning. In this section, we will discuss some of the most common problems that you may encounter with your Kenmore Refrigerator Model 795 and provide you with troubleshooting tips to resolve them.


Temperature Not Cold Enough

One of the most common issues that users face with their Kenmore Refrigerator Model 795 is when the temperature inside the refrigerator is not cold enough to keep food fresh. This can be frustrating and may lead to spoilage of perishable items. Fortunately, there are a few troubleshooting steps you can take to address this problem:


1. Check the thermostat settings

Start by checking the thermostat settings on your Kenmore Refrigerator Model 795. Ensure that the temperature is set to the recommended level for proper cooling. You can refer to the user manual or manufacturer’s instructions for the ideal temperature range.


2. Clear any obstructions

Make sure there are no items blocking the air vents inside the refrigerator. Blocked vents can restrict the airflow and prevent the refrigerator from cooling properly. Rearrange the contents of your fridge to allow for unrestricted air circulation.


3. Clean the condenser coils

Over time, dust and debris can accumulate on the condenser coils, hindering their ability to dissipate heat. To resolve this, unplug your refrigerator and locate the condenser coils typically located at the back or beneath the appliance. Gently clean the coils using a vacuum or a soft brush to remove any buildup.


Strange Noises

If you notice strange or unusual noises coming from your Kenmore Refrigerator Model 795, it could indicate an underlying issue. Here are a few steps to identify and troubleshoot the problem:


1. Check for levelness

Ensure that your refrigerator is properly leveled. If it is tilted or unbalanced, it can cause vibrations and unusual noises. Use a level tool to check and adjust the refrigerator’s position if necessary.


2. Inspect the fan and motor

Strange noises can also be a result of a faulty fan or motor. Remove any items stored near the fan area and listen for any unusual sounds. If the noises persist, you may need to contact a professional technician to inspect and repair the fan or motor.


3. Tighten loose components

Inspect your refrigerator for any loose components such as screws, handles, or hinges. Tighten them if necessary to eliminate any rattling or clanking noises.


Leaking Water

Finding water leaking from your Kenmore Refrigerator Model 795 can be a cause for concern. Here are some troubleshooting steps to address this issue:

See Also  Kenmore Series 100 Washer Troubleshooting

1. Check the water filter

If your refrigerator has a water dispenser or an ice maker, the water filter may be the culprit. A dirty or clogged filter can cause leaks. Replace the water filter according to the manufacturer’s instructions to ensure proper water flow.


2. Inspect the water supply line

Examine the water supply line connected to your refrigerator for any leaks or damage. Tighten any loose connections and replace the line if necessary. Make sure the water supply valve is fully open to maintain a steady flow without leakage.


3. Clear the drain tube

If the leakage is coming from the bottom of the refrigerator, it could indicate a clogged drain tube. Carefully remove any debris or ice buildup from the drain tube to restore proper drainage.

Troubleshooting Steps For Temperature Not Cold Enough

If you own a Kenmore Refrigerator Model 795 and have noticed that the temperature is not as cold as it should be, don’t panic just yet. There are several troubleshooting steps you can take to address this issue. In this article, we will explore three key areas to investigate: checking the temperature settings, cleaning the condenser coils, and inspecting the door seals. By following these steps, you can identify and resolve the problem, restoring your refrigerator’s cooling power.

Check Temperature Settings

The first thing to check when your Kenmore Refrigerator Model 795 is not reaching the desired temperature is the temperature settings. Open the refrigerator door and locate the control panel, usually situated at the top. Take a close look at the display and ensure that the temperature is set to the appropriate level. If the temperature is too high, adjust it to a cooler setting by pressing the corresponding button. Allow some time for the refrigerator to adjust to the new temperature before monitoring the changes.

Clean Condenser Coils

Dirty condenser coils can disrupt the cooling process, resulting in inadequate temperature levels. To clean the condenser coils on your Kenmore Refrigerator Model 795, follow these simple steps:

  1. Unplug the refrigerator from the power source to ensure your safety during the cleaning process.
  2. Locate the condenser coils, typically situated at the back or bottom of the refrigerator.
  3. Use a vacuum cleaner with a soft brush attachment or a long-handled brush to gently remove any dust or debris from the coils.
  4. Make sure to clean both the front and back of the coils thoroughly.
  5. Once the coils are clean, plug the refrigerator back in and monitor whether the cooling performance improves.

Inspect Door Seals

The door seals, also known as gaskets, play a crucial role in maintaining the temperature inside your Kenmore Refrigerator Model 795. When these seals are damaged or compromised, cold air can escape, causing the refrigerator to struggle with cooling. Follow these steps to inspect the door seals:

  1. Gently open the refrigerator door and examine the rubber seals that line the edges.
  2. Look for any visible signs of wear, such as cracks, tears, or gaps in the seals.
  3. To test the effectiveness of the seals, close the door on a dollar bill or a thin sheet of paper, ensuring it is placed between the seal and the refrigerator body.
  4. Try to pull out the paper with the door closed. If it slides out easily, it indicates that the seals are not creating a tight seal and need to be replaced.
  5. Contact the manufacturer or a professional repair technician for assistance in obtaining and installing new door seals.

By troubleshooting the temperature issue of your Kenmore Refrigerator Model 795 using these steps, you can save time and money by potentially avoiding the need for a costly repair or replacement. Remember to follow each step carefully, allowing sufficient time for any adjustments to take effect. Regular maintenance, such as cleaning the condenser coils and inspecting the door seals, can help ensure that your refrigerator continues to operate efficiently, keeping your food fresh and cold. Give these troubleshooting steps a try and enjoy the benefits of a fully functional Kenmore Refrigerator Model 795.

See Also  Whirlpool Refrigerator Water Inlet Valve Troubleshooting

Troubleshooting Steps For Strange Noises

If you own a Kenmore Refrigerator Model 795 and you’re hearing strange noises coming from your unit, don’t worry! This is a common issue that can be easily addressed by following a few troubleshooting steps. By identifying and resolving the source of these strange noises, you can ensure that your refrigerator continues to operate smoothly and quietly. In this article, we will discuss three important troubleshooting steps that can help you diagnose and fix the problem. Let’s dive in!

Check For Loose Or Damaged Parts

One of the first things you should do when troubleshooting strange noises in your Kenmore Refrigerator Model 795 is to check for loose or damaged parts. Over time, vibrations and everyday use can cause various components within your refrigerator to become loose or wear out. These loose or damaged parts can create rattling, banging, or humming sounds that may be quite bothersome.

To check for loose parts, start by inspecting the interior of your refrigerator. Open the door and listen for any unusual sounds. Pay close attention to the shelves, drawers, and bins to see if they are properly seated and secure. Gently push and pull each component to ensure they are firmly in place.

Next, move on to the exterior of the refrigerator. Carefully pull the refrigerator away from the wall to access the back panel. Remove the panel if necessary, and check for any loose screws, bolts, or attachments. Tighten any loose components using a screwdriver or wrench, being careful not to overtighten and cause damage.

Inspect The Evaporator Fan Motor

Another potential source of strange noises in your Kenmore Refrigerator Model 795 is a malfunctioning evaporator fan motor. The evaporator fan is responsible for circulating cold air throughout the refrigerator, so if there is an issue with the motor, it may produce unusual noises.

To inspect the evaporator fan motor, first, unplug your refrigerator from the power source to ensure your safety. Locate the evaporator fan motor, which is typically located behind the back panel of the freezer compartment. Remove any screws or clips holding the panel in place, and carefully lift it off.

Once you have access to the fan motor, visually inspect it for any signs of damage or obstruction. Look for any loose wires or visible wear and tear. Gently rotate the fan blades to see if they spin freely and without resistance. If you notice any issues, such as a broken fan blade or a worn-out motor, it may be necessary to replace the evaporator fan motor.

Clean Or Replace The Condenser Fan Motor

The condenser fan motor is another component that can cause strange noises in your Kenmore Refrigerator Model 795. This motor is responsible for cooling the condenser and removing heat from the refrigerator. If the condenser fan motor is dirty or malfunctioning, it can produce loud buzzing, humming, or grinding sounds.

To clean the condenser fan motor, start by turning off the power to your refrigerator. Locate the condenser fan motor, which is typically found at the back of the refrigerator near the bottom. Use a vacuum cleaner or a soft brush to remove any dust, debris, or pet hair that may have accumulated around the motor.

If cleaning the condenser fan motor doesn’t resolve the issue, it may be necessary to replace the motor entirely. Consult your Kenmore Refrigerator Model 795 user manual or contact a professional technician for assistance with motor replacement.

By following these troubleshooting steps and addressing any loose or damaged parts, inspecting the evaporator fan motor, and cleaning or replacing the condenser fan motor, you can successfully troubleshoot and resolve strange noises in your Kenmore Refrigerator Model 795. Remember to always prioritize your safety and consult professional help if needed. Happy troubleshooting!

See Also  Amana Refrigerator Ice Maker Troubleshooting
Kenmore Refrigerator Model 795 Troubleshooting

Credit: serviceandrepair.sellfy.store

Troubleshooting Steps For Leaking Water

If you own a Kenmore Refrigerator Model 795 and are experiencing issues with water leakage, it is essential to address the problem promptly. Leaking water can not only create a mess in your kitchen but also potentially damage your flooring and appliances. In this section, we will guide you through the troubleshooting steps to help you identify and fix the issue causing the water leakage.

Check Water Supply Line

A common cause of water leakage in refrigerators is a faulty or improperly connected water supply line. To troubleshoot this issue, follow these simple steps:

  1. First, locate the water supply line at the back of your Kenmore Refrigerator Model 795.
  2. Check if the water supply line is securely connected to both the refrigerator and the water source.
  3. Inspect the entire length of the supply line for any visible signs of damage or kinks.
  4. If you notice any damage or kinks, it is necessary to replace the water supply line. Contact a professional technician for assistance or order a replacement part from the Kenmore website.

Inspect Drain Pan And Drain Tube

Another potential cause of water leakage is a clogged or damaged drain pan or drain tube. Here’s how you can inspect and troubleshoot this issue:

  1. Locate the drain pan at the bottom of your Kenmore Refrigerator Model 795.
  2. Check if the drain pan is overflowing or has excessive water accumulation.
  3. If the drain pan appears full, carefully remove it and empty the water.
  4. Inspect the drain tube connected to the drain pan for any clogs or blockages.
  5. If you find any obstructions, use a small brush or pipe cleaner to remove them gently.
  6. Once you have cleared any blockages, reattach the drain pan securely.

Clean Or Replace Water Filter

A dirty or clogged water filter can also lead to water leakage in your Kenmore Refrigerator Model 795. Follow these steps to clean or replace the water filter:

  1. Locate the water filter in your refrigerator. It is commonly found in the upper right corner or the base grille.
  2. If your water filter is reusable and cleanable, carefully remove it from the refrigerator and clean it according to the manufacturer’s instructions.
  3. For disposable filters, remove the old filter and replace it with a compatible new one.
  4. Ensure the new or cleaned filter is properly inserted and secured in its designated place.

By following these troubleshooting steps, you can diagnose and resolve the issue of leaking water in your Kenmore Refrigerator Model 795. If the problem persists or if you are unable to identify the cause, it is advisable to contact a professional technician for further assistance.

Kenmore Refrigerator Model 795 Troubleshooting

Credit: m.youtube.com

Frequently Asked Questions For Kenmore Refrigerator Model 795 Troubleshooting

How Do I Fix A Kenmore Refrigerator Not Cooling?

To fix a Kenmore refrigerator not cooling, first check if the temperature settings are correct. Clean the condenser coils and check the evaporator fan for any obstructions. Make sure the door seals are in good condition. If the issue persists, contact a professional technician for further troubleshooting.

What Should I Do If My Kenmore Refrigerator Is Leaking Water?

If your Kenmore refrigerator is leaking water, start by checking the water line connections to ensure they are secure. Make sure the drain pan is not overflowing and clean any clogged drain tubes. Also, inspect the water filter for any leaks.

If the problem continues, seek assistance from a certified technician.

How Often Should I Defrost My Kenmore Refrigerator?

To maintain optimal performance, it is recommended to defrost your Kenmore refrigerator at least once a year. However, if you notice an excessive buildup of frost or ice, it is advisable to defrost it more frequently. Follow the manufacturer’s instructions in the user manual for specific guidelines on defrosting your model.

How Do I Reset The Control Panel On My Kenmore Refrigerator?

To reset the control panel on your Kenmore refrigerator, locate the reset button (usually found inside the refrigerator or on the control panel). Press and hold the reset button for a few seconds until you hear a beep sound or see the panel lights flash.

Release the button and the control panel should be reset.

Conclusion

Troubleshooting the Kenmore Refrigerator Model 795 can be a straightforward process with the right information and guidance. By following the troubleshooting steps covered in this blog post, you can identify and address common issues, ensuring your refrigerator operates efficiently. Remember to consult the user manual or reach out to the manufacturer for further assistance if needed.

With these troubleshooting techniques, you can keep your Kenmore Refrigerator Model 795 running smoothly and maintain its optimal performance.

Leave a Reply

Your email address will not be published. Required fields are marked *